S&B Intake Elbow's are designed to minimize airflow restriction to your engine, improve turbo spool, and lower EGT's. A great addition to your 98-02 Dodge 5.9L Cummins intake.
VEHICLE APPLICATION
Year: 1998.5-02
Make: Dodge
Model: Ram 2500, 3500
Engine: 5.9L Cummins Diesel
24 Valve only
TOOLS REQUIRED
• 10mm, 13mm, 1/2” Wrench & Socket
• 7/16” Deep Socket
• 3/16”, 4mm, 6mm Hex Drive
• Torque Wrench (In.lb.)
• Gasket Remover (Scraper)
• Vacuum
CAUTION
Use a 1/4 inch drive ratchet. NOTE: All
required torque specs. are called out in Inch
pounds NOT foot pounds!
Notes
Kit may not fit with the following
Aftermarket Parts installed:
• Body Lift or Lowering Kit
• Custom Hood
• Intercooler or Turbo upgrades
CARB Status - Exempt
CARB EO #: D-590-7
Legal for use in CA or other states adopting CA
emissions standards
See Page 3 for more info.
BEFORE YOU START
• Please read the entire product guide before proceeding.
• Ensure all components listed on page 4 are present.
• If you are missing any of the components, call our
customer support at (909) 947-0015.
• Do not attempt to work on your vehicle while engine is hot.
• Make sure the engine is turned off and the vehicle is in
Park or the Parking Brake is set.
INSTALLATION INSTRUCTIONS click -->> 76-1007.pdf - Google Drive