The FlashPro allows datalogging and limited tuning of the 2019+ US Acura RDX turbo. It includes Windows based software called FlashPro Manager.
California emissions compliant (CARB EO D-742-5), which allows this product to be used on street vehicles within the USA.
Important NoteThis FlashPro allows limited tuning or preset calibrations. For competition vehicles we recommend the FP-RDX-US FlashPro as that FlashPro allows full tuning.
This FlashPro can only be sold to US/Canada addresses.
- Programmable ECU interface.
- Connects via OBDII diagnostic port.
- USB 2.0 connection
- Works with Laptop or Desktop
- No ECU modification necessary.
- 20 hours on board datalogging memory.
- Security Password.
- FlashProManager Windows software.
- Check and clear diagnostic codes.
- Custom laptop gauges.
- Dual calibration storage - upload from one of two calibrations stored in the FlashPro
|EPA/CARB status (USA)||CARB EO D-742-5|
|Part Number||5YF-A52 through 5YF-A56
5YF-A62 through 5YF-A66
5YF-A72 through 5YF-A76
5YF-A82 through 5YF-A86
This dyno is of a stock RDX with Stage 1 and Stage 2 performance tunes.
Stage 1 operates in all 4 dynamic modes and delivers a 10 hp increase everywhere.
Stage 2 is configured for Stage 1 performance in snow and comfort and Stage 2 performance in Sport and Sport + modes. Stage 2 delivers 36 lb-ft more mid range torque and 28 more mid-range horsepower for a much more exciting drive.
The dyno figures are lower than the Accord turbo due to our four wheel dyno reading 10% lower than our 2 wheel dyno, and the AWD drivetrain absorbing more power. This leads to about a 20% torque and power difference from the 18 Accord. The midrange percentage improvements (15%-19%) are similar.
On the street
The Hondata reflash significantly reduces the throttle lag