Warning: Failure to disable the Air Filter Life System will cause a warning light that can only be reset by a GM Dealer. Please ensure you have disabled the system prior to driving the vehicle with your new S&B Intake. Please refer to steps 42-46 to cover this procedure.
- YEAR: 2019
- MAKE: Chevrolet/GMC
- MODEL: Silverado/Sierra 1500
- ENGINE: 5.3L, 6.2L Gas
This intake kit may not fit with the following aftermarket parts installed:
- Body Lift or Lowering Kit
- Custom Hood
- 10mm, 13mm, 3/4 Inch Wrench
- T15, T20 Torx Bit
- Pin Removal Tool or Flat Blade Screwdriver
- 5/16” Nut Driver or Flat Blade Screwdriver
- Phillips Screwdriver
- P5/32” or 4mm Allen Wrench
- 1 Pair of Pliers or similar tool
Note: Approximate Install Time: 1 hour
CARB Status - Pending
CARB EO # Pending
*Not Legal for use in CA and other states adopting CA emissions Standards.
Before You Start
- Please read the entire product guide before proceeding.
- Ensure all parts are present.
- If you are missing any of the components, call our customer support at (909) 947-0015.
- Do not work on your vehicle while the engine is hot.
- Make sure the engine is turned off and the vehicle is in Park or the Parking Brake is set.