- YEAR: 2015-2017
- MAKE: Ford
- MODEL: Expedition
- ENGINE: 3.5L Ecoboost
This intake kit may not fit with the following Aftermarket Parts installed:
- Body Lift or Lowering Kit
- Custom Hood
- 8mm, 10mm, 13mm Wrench & Socket
- Pin Removal Tool or Flat Blade Screwdriver
- 5/16” Nut Driver or Flat Blade Screwdriver
- Phillips Screwdriver
- 3/16” Allen Wrench
- 1 Pair of Pliers or similar tool
- Teflon Tape
Note: Approximate Install Time: 1 Hr 00 Mins.
S&B Filter Maintenance
KF-1058 Cotton Cleanable : If the enclosed filter is RED, it came pre-oiled from the factory. Click here for exact oil amount required for cleaning.
KF-1058D Dry Extendable : If the enclosed filters is WHITE, it is a disposable filter and should be discarded once it reaches capacity. This filter does not require oil.
CARB Status - Pending
CARB EO # Pending
*Not Legal for use in CA and other states adopting CA emissions Standards.
Before You Start
- Please read the entire product guide before proceeding.
- Ensure all parts are present.
- If you are missing any of the components, call our customer support at (909) 947-0015.
- Do not work on your vehicle while the engine is hot.
- Make sure the engine is turned off and the vehicle is in Park or the Parking Brake is set.